Description
A Lightweight, Portable Ramp for Doorways & Single Step Rises
The TRANSITIONS Angled Entry Ramp is a portable, stand-alone threshold ramp featuring independently adjustable legs with swivel feet, allowing for vertical adjustment ranging from 1-3/8 to 5-7/8 inches in height. This self-supporting aluminum threshold ramp is ideal for doorways that swing in and out, uneven surfaces, or single step rises.
Manufactured from high-strength, lightweight aluminum, this ramp has a 700 lb weight capacity and is extruded with texture for better traction. The independently adjustable legs have pivoting footpads to accommodate varying angles and surface types, as well as allowing for vertical adjustment. For added safety, it comes with pre-drilled slot holes for anchoring, and hardware is included.
EXTRUDED TREAD SURFACE Offers slip resistance to ensure traction in any weather.
ADJUSTABLE LEGS WITH SWIVEL FEET Allows for approximately 2 inches of vertical adjustments. The legs adjust independently, making the Angled Entry Ramp the perfect solution for uneven surfaces.
HIGH-STRENGTH ALUMINUM MATERIALS This ramp is made completely out of high-strength aluminum which will not rust or corrode over time.
PRE-DRILLED SLOTS Holes are pre-drilled for anchoring. Hardware included.
- Lightweight and portable, easily fits in any car
- Legs adjust independently for use on uneven surfaces
- Legs adjust within approximately 2-inch height range
- Low profile allows doors to easily swing open over the ramp
- Made from high-strength, lightweight aluminum
- Textured extruded aluminum surface for increased traction
- Self-supporting design for increased stability
- Pre-drilled slots for anchoring
- 700 lb weight capacity
Warranty
1. Homecare Products, Inc., dba EZ-ACCESS (“Manufacturer”), hereby warrants its products shall be free from defects in material and workmanship under normal use and service for the lifetime of the product. This limited warranty is applicable to Manufacturer’s parts and components only (i.e., warranty excludes powder-coated finish, applied non-skid tape, etc.).
2. Manufacturer’s obligation and purchaser’s sole remedy under this warranty is limited to, at Manufacturer’s option, repair or replacement of parts and components, which upon examination shall disclose to Manufacturer’s reasonable satisfaction to have been defective. The repair or replacement of a defective product under this warranty will be made by Manufacturer without charge for parts or labor. In the case of a discontinued product, Manufacturer reserves the right to replace the product with a new product of comparable value and function. Manufacturer also reserves the right to refund the purchase price as its exclusive warranty remedy. Purchaser must contact Manufacturer to request service prior to asserting any claim pursuant to this warranty. Manufacturer will then, at its option, either issue a Return Authorization (RA) for return of the product or schedule examination of the product on location. This limited warranty extends to the original purchase and delivery only and is non-transferable. Proof of purchase is required.
3. Manufacturer’s liability is limited to the items set forth above and no part of this warranty shall extend to loss or damage exacerbated by purchaser’s failure to mitigate same, any alleged defect not reported by purchaser within thirty (30) days after discovery, or loss or damage due to (a) installation, alteration, relocation, faulty maintenance, improper loads, negligence, accident, vandalism, misuse, or abuse; (b) ordinary wear and tear; (c) shrinkage, warping, fractures, discoloration, etc. within reasonable tolerances caused by aging or exposure to the elements including dampness, condensation, or corrosion; (d) changes in grading or landscaping of the surrounding ground; (e) defects in adjoining or contiguous structures; (f) soil movement or changed site conditions; or (g) acts of God, including, but not limited to fire, explosion, smoke, water escape, windstorm, rain, hail, lightning, falling trees, insects, aircraft, ground vehicles, flood, snow, ice, and earthquake. Under no circumstances shall Manufacturer be liable for injury to any person or damage to any property whatsoever by virtue of this warranty or otherwise.
4. DISCLAIMER: THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORILY OR OTHERWISE. HOWEVER, IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED BY FEDERAL REGULATION OR IN ANY JURISDICTION WHERE PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THIS LIMITED WARRANTY DESCRIBED HEREIN.
5. MANUFACTURER SHALL NOT BE LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPLACEMENT OF THE DEFECTIVE WORKMANSHIP. THE MAXIMUM LIABILITY OF MANUFACTURER UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY.
6. This warranty is in addition to, and not in limitation of, any and all other rights and remedies to which purchaser may be entitled at law or in equity. Federal regulations and some state statutes may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to a particular purchaser. This warranty provides specific legal rights, and purchaser may have other rights which may vary by jurisdiction. Manufacturer reserves the right to change or improve its product without any obligation to change or improve any product previously manufactured
FAQ
With the adjustable feet, what is the minimum and maximum height of threshold it can accommodate?
The TAER 12 height range is 1.92” to 2.958”. The TAER 24 comes with two different sizes of adjustable feet. The shorter set provides a height range of 2.154” to 3.375” and the taller ones provide a height range of 3.178” to 4.361”. The TAER 36 height range is 3.681” to 5.836”.
Does the plate at the bottom of the ramp move?
Yes, the TRANSITIONS Angled Entry Ramp has an adjustable bottom transition plate so that it can provide smooth ramp-to-ground and ground-to-ramp transitions.
Does this ramp require assembly?
Yes, simply attach the two adjustable feet and set them to the necessary height.
Do the feet move?
Yes, the feet swivel, allowing this ramp to adapt to uneven surfaces.
How do you keep the ramp from moving?
There are pre-drilled holes for anchoring in the bottom transition plate and hardware is provided for drilling into a wood surface.
