Aquatic Access Above Ground

Aquatic Access Above Ground Lifts feature variable travel distances depending on the desired seat transfer height, wall height and width, desired clearance, bench angle and depth, and ceiling height (if applicable). We have standardized several models, but all can be adapted or customized to meet the specific needs of each installation, including heavy-duty (HD) designs. The lifting capacity of standard lifts is 300 lbs. at 55-65 PSI, depending on the weight of added accessories. Seats can be manually turned 360º.

SKU: Model: AG48 - AG60 - AG72 Category: Pool & Spa Lifts

Description

Aquatic Access Above Ground Lifts offer seats that can be forward-facing (cylinder behind the seat) for assisted operation or side-facing (with the cylinder to the left or right of the seat) for possible independent operation. Many users can rotate themselves over the side of the pool or spa and reach the control knob, with a self-turning handle accessory available. The fresh water used to lift the seat can be drained into the pool or spa, or through a longer hose to water the garden or otherwise recycle.

Model AG-48

Model AG-60

Model AG-72

The AG48, AG60 and AG72 is mounted on a stainless steel plate welded to the cylinder bottom and bolted to the floor or deck. Mounting options include a top-edge bracket and a tripod brace at the bottom of cylinder. Optional side-facing seat and stationary self-rotating handle allow some people to use these lifts unassisted by manually rotating themselves while on the seat.

For concrete or wood floors/decks, the cylinders are welded to a stainless steel plate and bolted to the floor. Mounting options include a top wall bracket and tripod bracing for free-standing units.

For installing in the ground, the cylinder mounts to a (customer-supplied) 6″ x 6″ treated wood post (WP) usually set in concrete a minimum of 30″ deep.

INCLUDED

Two stationary armrests, one seat belt, deck mounting hardware, choice of white (standard) or blue seat. Blue seats tend to fade unevenly in bright sunlight over time.

OPTIONAL

Single flip-up armrests for transfer side of side-facing seat, right or left side-facing seats, double flip-up armrests, adjustable full-support headrest, seat belts, a larger seat, a footrest, and an underseat pad to protect spa benches.

Specifications

Manual

Warranty

AQUATIC ACCESS INC. warrants to the original purchaser that all structural components if its pool/spa lifts will be free of mechanical defects for six years from purchase date, provided product has not been altered, misused, or abused.

AQUATIC ACCESS INC. warrants to the original purchaser that valves, seals, hoses, seat shells, headrests, and footrest pads will be free of operational defects for two years from purchase, provided the product has not been altered, misused, or abused.

The stainless steel finish should be inspected monthly, any spots cleaned with a plastic pad and stainless steel cleaner, and the surface waxed as needed. When not in use for extended periods, do not store the lift in the same area as pool chemicals.

Warranted parts will be replaced free of charge directly to the owner or dealer. Replacement of any part is very simple with common tools; therefore no labor charges are accepted by the manufacturer. If the customer cannot replace the parts, shipment for factory labor must be paid by the customer.